UPGRADE ATTENTION

More and more customers contacted us recently to need the upgrade software to make the camera work. But Our website does not upload any upgrade software because our cameras are constantly being updated.
A firmware upgrade program not be compatible with each other. In other word,  an upgrade for Model Ltl-5210M only applies to that model.Even from the same camera, The corresponding upgrade software will also be different. And there are different software upgrade version for different problems.
If a camera is falsely upgraded by running a non-compatible program, it will quit working and needs to be sent back for repair. This issue is not covered under warranty. program not be compatible with each other

Please kindly fill the form at the right and provide us your camera model number,the bar code information (below is the bar code number for your reference ) from your camera,we will send you the right firmware version directly to you by email based on the information you provide.

(Remark: Pls provide us your detail order number information if you buy from us directly,we will reply you priority,we will contact you within 24~48hours,if you do not buy from our official store.it will take more time to reply you )

How to upgrade your cameras ?

Firmware Upgrades :

The Ltl Acorn reserves the right to upgrade the camera and the firmware. Follow the steps below to implement the upgrades:

1: Install batteries and the SD card.
2:Back up SD card the contents to other area. Format the SD card on the camera.
3:Retrieve the SD card and plug it in your computer (SD card reader may needed).Copy and paste the xxx.bin file (Remark: the xxx.bin file means that we will send you the right upgrade version based on different models)in the root directory of the SD card.(Inquire the national distributor if there is an upgrade available and where to
download it.)
4:Retrieve the SD card and insert it back in the camera. Press “OK” key and put Switch to TEST position. Look LCD appear boot LOGO and then loosen the “OK” key.
5: Enter MENU, navigate the marker to DEFAULT SET, and press OK. The upgrade has been installed successfully.
6:Re-format the SD card on the camera.The upgrade will have been installed successfully

Attention: A firmware upgrade program not be compatible with each other. In other word, for example :an upgrade for Model Ltl-5210M only applies to that model. If a camera is falsely upgraded by running a non-compatible program, it will quit working and needs to be sent back for repair. This issue is not covered under warranty. program not be compatible with each other